MagCAD Hi @Hexsense many thanks for the message. If you've not got anything mounted on the lower Blendr position you can mount the short version so your Wahoo Bolt device is particularly tight. Take a look at the attached images and let me know if this would work or not.
MagCAD Hi @BuTbKa, thanks for your question. The hole centres are 21mm apart on this mount whereas the Garmin OEM inserts are 20mm apart. If you let me know the measurement on your K-Edge mount I can always update the design to suit.
MagCAD@tjs1977 Hi Tony, brilliant. That sounds how I intended it to work. Thanks for letting me know and enjoy using the mount. Feel free to get in contact if you have any other questions.
MagCAD Hi @tjs1977
Thanks for commenting on the mount and for your feedback on the design.
I must reassure you; both the material and design are particularly robust. You shouldn't fear breaking a tab off when releasing your Garmin Varia.
Feedback in the initial design phase was the number one priority was that the device was safe and secure. So the mount has been purposely designed to have a strong grip when your Varia is attached. That way, unlike other designs I've come across, there's no chance of you loosing it.
Because the mount is quite small it's hard to remove the first couple of times if you're just holding the mount. Best to have it attached to a saddle and use the leverage of your Garmin Varia to remove it.
Regarding the fit of the GoPro lug, all the different type's I've tried offer a good fit. Obviously I cant control what tolerances other generic mounts are designed to. But if you drop me a direct message I'm happy to tweak the design and send you another mount to try that has a tighter fit.
Feel free to get in contact if you have any more queries or questions.
Thanks
Andy
MagCAD Designs
MagCAD Hi @ben_kavoosi take a look at the attached photos of the extension we've been working on. Rather than making the mount longer it works a lot better having a separate extension. Let us know your thoughts.
MagCAD@ben_kavoosi Hi, Yeah shouldn't be a problem. Is there any other modifications you want? I will get something uploaded in the next 24hrs and drop you a link. Cheers
We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers: