Mimaki Full Color Photopolymer
High Definition Full Color- 3D Printing Material
Material Jetting
Loading contents...
Mimaki Full Color Photopolymer
High Definition Full Color- 3D Printing Material
Material Jetting
Material info
About High Definition Full Color- 3D Printing Material
Using the UV curing inkjet process, the UV ink (CMYK, White) is cured layer by layer. This can produce objects with more than 10 million different colors. Final parts can satisfy professionals’ exacting requirement to make full color and fine modeling of high details, for example, figures, 3D maps and architecture mock-ups. And the post processing like over coating and attachment of screws is also able to apply to an object after printing.
Color & Finishes
Full Color
Standard
This finish has the supports removed and the parts are rinsed. Parts may have partial shiny surfaces and staircasing may be noticeable in hard light conditions.
This finish has the supports removed and the parts are rinsed. Parts may have partial shiny surfaces and staircasing may be noticeable in hard light conditions.
Matte
This finish has the supports removed and the parts are rinsed, then an additional matte coating is applied to reduce layer lines.
This finish has the supports removed and the parts are rinsed, then an additional matte coating is applied to reduce layer lines.
Technology
- Material Jetting
Description
Applications
Figurines, Medical models, Architecture models, Realistic visual prototypes
Material Highlights
Vivid full color, Photorealistic color accuracy, Fine details
Design Guidelines
Bounding Box
Bounding Box Max
495 x 495 x 300 mm
Bounding Box Min
2.5 x 2.5 x 2.5 mm
The bounding box is a 3D imaginary outline of a box that encloses the smallest area occupied by your model. Your model must be within the minimum and maximum bounding box sizes. If the size of the model is close to the maximum bounding box, then the printing orientation will be restricted.
Walls
Supported Wall Thickness Min
1.0 mm
Unsupported Wall Thickness Min
1.0 mm
Wires
Supported Wires Min
0.8 mm
Unsupported Wires Min
1.0 mm
Details
Details Min Embossed
0.8 mm
Details Min Engraved
0.8 mm
Escape Holes
Single Escape Hole Diameter (Min)
3.0 mm
Multiple Escape Hole Diameter (Min)
1.0 mm
A single escape hole at the end of a cavity will not allow material in the corners near the escape hole to fully escape. So we recommend multiple escape holes at both ends of the cavity.
Clearance
Min
0.4 mm
Sprues
0.8 mm
Sprues are wires that keep two or more parts together. Parts should be connected with a minimum of two sprues each. Please consider the size of your sprues and increase them as needed as minimum guidelines will not always be adequate for large models. If the sprues are within the guidelines and are broken, but there is no damage to your model, we will still ship them as is.
Interlocking & Enclosed Parts
Interlocking
Yes
Enclosed
No
Parts in File
Max
99
Accuracy
Accuracy
± 0.05 mm +0.25%
For example: a product with dimensions of 50 x 50 x 100 mm can be 0.05 mm + 0.0025*100 mm = 0.3 mm bigger or smaller in any direction.
Related Materials
Also Known As Frosted Detail Plastic, Resin-based Acrylic Plastic, Photopolymer, VisiJet M3 Crystal
Fine Detail Plastic - 3D Printing Material
Application: Scale Models, Miniatures, Jewelry Prototypes, Mold Masters
Learn More →