Also Known As Frosted Detail Plastic, Resin-based Acrylic Plastic, Photopolymer, VisiJet M3 Crystal
Fine Detail Plastic – 3D Printing Material
Material Jetting
Loading contents...
Also Known As Frosted Detail Plastic, Resin-based Acrylic Plastic, Photopolymer, VisiJet M3 Crystal
Fine Detail Plastic – 3D Printing Material
Material Jetting
Material info
About Fine Detail Plastic – 3D Printing Material
Fine Detail Plastic is an acrylic material capable of extremely high detail and is a popular choice for hobbyists creating scale models, miniature sets, and other decorative products. Our New Gray Fine Detail Plastic is an opaque material that shows exceptional contrast and detail and Clear Ultra Fine Detail Plastic has an improved clarity and look. Although the surface can be uneven in color due to the nature of the printing process for Smooth and Smoothest, our new Gray and Clear Ultra have a more uniform color due to the updated process.
Color & Finishes
Smooth, Smoothest & Clear Ultra Fine Detail Plastic
Gray Fine Detail Plastic
Smooth Fine Detail Plastic
This finish offers a smooth surface and high detail.
This finish offers a smooth surface and high detail.
Smoothest Fine Detail Plastic
This finish is capable of the high detail and smooth surface.
This finish is capable of the high detail and smooth surface.
Clear Ultra Fine Detail Plastic
3D Systems Visijet M2R Clear material at UHD resolution settings to provide finest details at 32 micron layer height.
3D Systems Visijet M2R Clear material at UHD resolution settings to provide finest details at 32 micron layer height.
Gray Fine Detail Plastic
3D Systems Visijet M2R Grey material at HD resolution settings to provide fine details at 32 micron layer height.
3D Systems Visijet M2R Grey material at HD resolution settings to provide fine details at 32 micron layer height.
Technology
- Material Jetting
Technical Documents
Material Properties
Tensile modulus (ASTM D638)
1463 MPa
Tensile strength (ASTM D638)
42.4 MPa
Elongation at break (ASTM D638)
6.83 %
Description
Material Highlights
high detail & dimensional accuracy, smooth surface, translucency for thin walls
Handling and Care
heatproof to 56°C/132°F , watertight, not foodsafe, poor uv resistance
Design Guidelines
Bounding Box
Bounding Box Max
282 × 181 × 150 mm (Smooth)
282 × 181 × 100 mm (Smoothest)
290 x 210 x 145 mm (Gray)
290 x 210 x 100 mm (Clear Ultra)
Bounding Box Min
X + Y + Z > 12 mm
The bounding box is a 3D imaginary outline of a box that encloses the smallest area occupied by your model. Your model must be within the minimum and maximum bounding box sizes. If the size of the model is close to the maximum bounding box, then the printing orientation will be restricted.
Walls
Supported Wall Thickness Min
0.3 mm
Unsupported Wall Thickness Min
0.6 mm
Wires
Supported Wires Min
0.6 mm diameter (or thinnest dimension if not circular). 1.0 mm diameter (or thinnest dimension if not circular) for sprues, or wires bearing weight.
Unsupported Wires Min
0.8 mm diameter (or thinnest dimension if not circular)
Details
Details Min Embossed
0.1 mm high & wide
Details Min Engraved
0.1 mm high & wide
Escape Holes
Single Escape Hole Diameter (Min)
One escape hole is not adequate for this material
Multiple Escape Hole Diameter (Min)
4.0 mm diameter
A single escape hole at the end of a cavity will not allow material in the corners near the escape hole to fully escape. So we recommend multiple escape holes at both ends of the cavity.
Clearance
Min
0.05 mm
Sprues
1.0 mm diameter (or thinnest dimension if not circular)
Sprues are wires that keep two or more parts together. Parts should be connected with a minimum of two sprues each. Please consider the size of your sprues and increase them as needed as minimum guidelines will not always be adequate for large models. If the sprues are within the guidelines and are broken, but there is no damage to your model, we will still ship them as is.
Interlocking & Enclosed Parts
Interlocking
Yes
Enclosed
No
Accuracy
Accuracy
± 0.3 - 0.7 mm for every 100 mm
For example: a product with dimensions of 50 x 50 x 100 mm can be up to 0.7 mm bigger or smaller in any direction.
Related Materials
Mimaki Full Color Photopolymer
High Definition Full Color- 3D Printing Material
Application: Figurines, Medical Models, Architecture, Terrain Models, Realistic Visual Prototypes
Learn More →