This button is used to replace the plenum for the Puritan Bennett/Covidien Breeze CPAP Headgear mask. Simply insert the new plenum and tighten the thumbscrew. Insert the Breeze button on the other side.
All parts are printed with Selective Laser Sintering (SLS) nylon 12 which is a durable versatile plastic that can be used for a wide range of applications. SLS is skin friendly and dishwasher safe.
Read more
It's a breeze! Enjoy a good night's sleep.
Plenum replacement instructions
1. On the knob side, use needle-nose pliers and pull the knob off of the stem. You will need to apply significant force to pull the stem through the knob. Be careful not to lose the sprocket.
2. On the button side, use needle-nose pliers and pull the button which is firmly pressed into the plenum and the nasal piece. If you break the button you can get a new one from my website.
3. Once the knob and button are removed, you can easily remove the old plastic from the old broken plenum.
4. To replace the plenum put the side with the slot over the stem and replace the knob. You should be able to tighten it down by screwing the knob onto the stem.
5. On the button side, align the hole in the plenum over the hole on the nasal piece and press the button firmly into the hole. If the hole is too wide, apply a drop of glue to secure.
Over a 100 customers have utilized these instructions successfully.