Detail of a 3D printed part as you will receive it.
YT1300 DEAGO CABIN COCKPIT CONSOLE DRILLED
Made by
Print With Shapeways
Choose Your Material
Choose your color and finish
Choose Your Material
$22.51
Choose your color and finish
Have a question about this product?
contact the designerYou must be logged in and verified to contact the designer.
Product Description
Falcon cockpit console drilled for the DeAgo kit
If you want to mod your DeAgo Falcon cockpit, but you want to keep all your stock parts except the main central console, you can buy this upgrade.
I've designed a cabin cockpit central console to replace the original one with the sticker. If you are happy enough with the stock parts, but you like my cockpit main console you can have it without buying the complete cockpit set.
ATTENTION: Modeler skill level, advanced. You will have to mod -cut, chop and sand- your stock DeAgo floor to adapt this upgrade. If you aren't an advanced model kit builder don't buy this upgrade.
You will need to modify heavily the stock cockpit to fit this one. For skilled modellers. You will save some money -instead of buying a complete console and floor- but you need to work a little bit more...
On this product you will receive one -1- cockpit main console with pre drilled holes for 0.25 mm fiber optics.
This cockpit main console has the size to fit inside the stock part, but you will have to trim the stock cockpit console of the DeAgo Falcon to fit this upgrade.
This upgrade it's a very close replica from the cockpit console panel seen on the studio filming model. It has all the little details.
It has built in pre drilled holes for 0,25 mm fiber optics strands. So you can light the buttons on the central panel,maps computer screen, front side, back and on the yokes panel.
This main console is ready to be lighted. Is hollow -it has a hole on the bottom- so you can put a small led inside and play with unpainted buttons. Also it comes with more than 60 pre drilled holes for 0.25 mm fiber optics.
If you order from Europe, this product will be printed in Europe, on the Netherlands, so don't worry for high shipping costs or customs fees.
If you want to mod your DeAgo Falcon cockpit, but you want to keep all your stock parts except the main central console, you can buy this upgrade.
I've designed a cabin cockpit central console to replace the original one with the sticker. If you are happy enough with the stock parts, but you like my cockpit main console you can have it without buying the complete cockpit set.
ATTENTION: Modeler skill level, advanced. You will have to mod -cut, chop and sand- your stock DeAgo floor to adapt this upgrade. If you aren't an advanced model kit builder don't buy this upgrade.
You will need to modify heavily the stock cockpit to fit this one. For skilled modellers. You will save some money -instead of buying a complete console and floor- but you need to work a little bit more...
On this product you will receive one -1- cockpit main console with pre drilled holes for 0.25 mm fiber optics.
This cockpit main console has the size to fit inside the stock part, but you will have to trim the stock cockpit console of the DeAgo Falcon to fit this upgrade.
This upgrade it's a very close replica from the cockpit console panel seen on the studio filming model. It has all the little details.
It has built in pre drilled holes for 0,25 mm fiber optics strands. So you can light the buttons on the central panel,maps computer screen, front side, back and on the yokes panel.
This main console is ready to be lighted. Is hollow -it has a hole on the bottom- so you can put a small led inside and play with unpainted buttons. Also it comes with more than 60 pre drilled holes for 0.25 mm fiber optics.
If you order from Europe, this product will be printed in Europe, on the Netherlands, so don't worry for high shipping costs or customs fees.
Details
What's in the box:
YT1300 DEAGO CABIN COCKPIT CONSOLE NF
Dimensions:
Success Rate:
First To try.
What's this?
Rating:
Mature audiences only.
More From This Shop
$53.75
$65.79
