Spacers to lower the front chassis of the Buri.
The parts can be slid in without removing the screws.
You will need longer screws. Front screw use a M4x25mm.
Rear Screw you will need M4x18, 20, 22, 25. Otherwise the length
of the screw will intercept with the steering linkage. Check that each time you
adjust the ride height.
Set consists of six spacers (1,2,3,4,5,6mm).
I do not stack the front spacers. It´s simply a PITA.
Works best with the Buri Low Rider Rear Set and the Buri Front Suspension Nut Holder.